SUBMERSIBLE PUMPS

All Products

Tsurumi LB Series-lightweight, submersible portable drainage pumps

The Tsurumi LB-series is a single-phase, lightweight and compact dewatering pump. Because of its slim design, it fits in an 8" casing. Adoption of semi-vortex pump design enables it to maintain the original pump performance for an extended period even if the impeller becomes worn. The discharge direction is selectable between top and horizontal, which prevents folding or bending of the discharge hose. Automatic model has a level control unit with a timer function that eliminates excessive switching on and off caused by rough water.

Discharge bore 50mm (80mm option)
• Top discharge
• Semi-vortex /open type impeller
• Single phase
• 2 pole motors from 0.48 to 1.5kW
• Motor protector, dry running

View Tsurumi LB Series Submersible Pump Specs     View Tsurumi LB-1500 Submersible Pump Specs

 

 

Tsurumi HS Series … submersible portable drainage pumps
The Tsurumi HS-series is a single-phase, portable dewatering pump with a spiral pump casing that allows sand and silt-laden water to pass through the pump easier than any other pumps of this class. The shaft mounted agitator prevents "Air Lock" that tends to take place on vortex or semi-vortex pumps.

Discharge bore 50 - 80mm
• Side discharge
• Semi-vortex impeller
• Single phase
• 2 pole motors from 0.4 to 0.75kW
• Motor protector, dry running

View Tsurumi HS Series Submersible Pump Specs

 

 

Tsurumi NK Series … slimline, portable, heavy duty, submersible drainage pumps
The Tsurumi NK-series is a KTV-based single-phase dewatering pump. The side-flow, top-discharge design assures efficient motor cooling even when it operates at level water levels. Semi-vortex pump design is adopted for maximum durability and maintaining pump’s performance. The pump has a built-in starting capacitor.

Discharge bore 50mm
• Top discharge
• Semi-vortex impeller
• Single phase
• 2 pole motors from 1.5 to 2.2kW

View Tsurumi NK Series Submersible Pump Specs

 

 

 

 

Tsurumi KTZ Series … submersible heavy duty, high head/ high volume dewatering pumps
Tsurumi KTZ-series is a three-phase, cast iron, high head dewatering pump. High head or high flow versions are available in every motor size.

Greatly increased maximum submersion depth possible due to the mechanical seal’s resistant to high pressure. Top mounted outlet makes pump suitable for installation in confined spaces.

Discharge bore 50 - 150mm
• Top discharge
• Semi open type impeller
• Three phase
• 2 pole motors from 1.5 to
  11kW

View Tsurumi KTZ Series Submersible Pump Specs

 

 

Tsurumi KTX Series … submersible explosion proof version of KTZ series
The Tsurumi KTX-series is the explosion-proof type of the general dewatering pumps, KTZ-series. . Suitable for operation in areas where an explosive atmosphere occasionally occurs. It is designed to conform class 2 Group 4 that is equivalent to d II T4.

Discharge bore 50 - 80mm
• Side discharge
• Semi open type impeller
• Single & three phase
• 2 pole motors, 0.4 - 3.7kW

View Tsurumi KTX Series Submersible Pump Specs

 

 

Tsurumi KRS Series Submersible Dewatering Pump

4 pole motors for durability
The Tsurumi KRS-series is a three-phase, cast iron , high volume and heavy-duty dewatering pump operated by 4-pole motor. The KRS series, coupled with 4-pole motor, offer reliability, ruggedness and durability.

Discharge bore 80 - 250mm

• Top discharge

• Semi-open type impeller
  (closed type on KRS1022)

• Three phase

• 4 pole motors from 2.2 to 22kW

View Tsurumi KRS Series Submersible Dewatering Pump Specs
 

 

 

Tsurumi GSZ Series … submersible high volume dewatering
Tsurumi GSZ-4-series is a high head and high volume dewatering pump driven by 4-pole motor. The pump has a water jacket, surrounding the motor casing. A portion of pumped water is allowed to flow around the motor on its way to the side discharge. This allows the pump to operate at low water levels for extended periods.

Discharge bore 150 - 250mm
• Side discharge
• Closed type impeller
• Three phase
• 4 pole motors from 37 to 75kW

View Tsurumi GSZ Series Submersible Pump Spec

 

 

Tsurumi LH Series … submersible high head dewatering pumps

The Tsurumi LH-series is a three-phase, cast iron made, high head dewatering pumps. The pump can be installed in a narrow place, as it is cylindrical and the ischarge flange is located at the top of the pump. The centre-flange construction balances the pump and enables it to be lifted up/down without disconnecting it from piping.

Discharge bore 100 - 200mm

• Top discharge

• Closed type impeller

• Three phase

• 2 pole motors from 15 to 110kW

View Tsurumi LH Series High Head submersible Pump Specs

 

 

Tsurumi LH-W Series … extra high head submersible dewatering Pumps
The Tsurumi LH-W-series is an extra high head series of the LH pumps having two pump stages with chromium iron closed TRsurumiimpellers. The centre-flange construction balances the pump and enables it to be lifted up/down without disconnecting it from piping.

Discharge bore 50 - 100mm
• Top discharge
• Closed type impeller
• Three phase
• 2 pole motors from 3 to 30kW

View Tsurumi LH-W Series Submersible Pump Specs

 

 

Tsurumi LSC Series Submersible Sump Pump

Pumps down to a 1mm minimum level
The tsurumi LSC is a portable, single-phase residue dewatering pump. Tsurumi’s unique sealing device makes the pump capable of pumping down to floor level. The rubber-lined base plate prevents scratching to floor surface.

The discharge direction is selectable between top and horizontal, which prevents folding or bending of the discharge hose.

Discharge bore 25mm

• Top discharge

• Semi vortex impeller

• Single phase

• 2 pole motor, 0.48kW

View Tsurumi LSC Series Submersible Sump Pump Specs

 

 

Tsurumi HS Series Submersible Pump

Light duty, compact agitator pump
The Tsurumi HS is a semi-vortex, portable slurry pump driven by a single-phase motor. The impeller and agitator are made of chromium iron for longer wear life when the pump handles abrasive liquids. It also features a 550Watts output motor, which provides extra margin in its motor output for use in exacting conditions.

Discharge bore 50mm

• Side discharge

• Semi vortex impeller

• Single phase

• 2 pole motor, 0.55kW

View HS Series Submersible Pump Specs

 

 

Tsurumi KRS Slurry Pump Series 4 pole submersible agitator pump

The Tsurumi KRS-series, slurry type, is a powerful slurry pump using KRS pumps as a base. An agitator is provided to assist smooth suction of the pumping media. The top discharge design allows the overall diameter of the pump to be reduced for installation in confined spaces.

Discharge bore 80 - 150mm
• Top discharge
• Semi open type impeller
• Three phase
• 4 pole motor, 4 - 9kW

View Tsurumi KRS Series Submersible Sand Pump Specs

 

 

Tsurumi NKZ Submersible Slurry Pump Series

Heavy duty 4 pole agitator pump
As a sand pump series, the Tsurumi NKZ-series pump has a spiral pump casing and an agitator mounted on the shaft for smooth suction of slurry, mud or sand. The pump has a water jacket, surrounding the motor casing. A portion of pumped water is allowed to flow around the motor on its way to the side discharge. This allows the pump to operate at low water levels for extended periods.

Discharge bore 80 - 150mm

• Top discharge

• Semi open type impeller

• Three phase

• 4 pole motor, 2.2 - 11kW

View Tsurumi NKZ Submersible Slurry Pump Series Specs

 

 

Tsurumi GPN Series Submersible sand Pump

Special steel impeller for longer life
The Tsurumi GPN-series is a high power sand pump with a large agitator. Chromium iron wearing parts and an extra thick pump casing means the pump delivers long-lasting performance and outstanding durability. It has a water jacket for forced cooling of the motor, which permits the pump to operate at low water levels for extended period of time.

Discharge bore 80 - 100mm

• Side discharge

• Semi open type impeller

• Three phase

• 4 pole motors, 0.55 - 11kW

View Tsurumi GPN Series Submersible Sand PumpSpecs

 

 

Tsurumi PU Series Submersible Pumps

Lightweight, corrosion resistant pump

The Tsurumi PU-series is one of the Tsurumi VANCS-series. Being made of stainless steel and special resin, the pump is not only lightweight but corrosion-resistant as well. Built-in vortex impeller and large passage facilitate pump operations to readily dispose of liquid containing various kinds of foreign matter. Automatic type is available in the whole range.

Discharge bore 40 - 80mm

• Side discharge

• Vortex impeller

• Single & three phase

• 2 pole motors, 0.15 - 1.5kW

View Tsurumi PU Series submersible Pump Specs
 

 

 

Tsurumi U Series Vortex Impeller Submersible Pump

Tsurumi Vortex Impeller Choke free operation

The Tsurumi U-series is a vortex pump powered by a 2-pole motor. The impeller produces vortex flow that allows fibrous materials and solid matter to be pumped out with minimum contact with the impeller. It offers practically choke-free operation in sewage pumping.

Discharge bore 40 - 80mm

• Side discharge

• Vortex impeller

• Three phase

• 2 pole motors, 0.25 - 3.7kW

View Tsurumi U Series Submersible Pump Specs

 

 

Tsurumi UZ Series 4 pole Vortex Impeller Submersible Pump

Tsurumi 4 pole heavy duty pump

The tsurumi UZ-series is a vortex pump driven by a 4-pole motor. It has a large solids passage that is equivalent to its discharge diameter giving it excellent solid handling capability. It offers practically choke-free operation in sewage pumping.

Discharge bore 50 - 100mm

• Side discharge

• Vortex impeller

• Three phase

• 4 pole motor, 1.5 - 11kW

View Tsurumi UZ Series Submersible Pump Specs

 

 

Tsurumi B Series Submersible Sewage Pump

Tsurumi Channel impeller sewage pump
The Tsurumi B-series is the base model for the Tsurumi range of submersible sewage pumps, and can be used for a wide range of applications.

A channel impeller prevents internal clogging and enables the pump to efficiently transfer sewage and wastewater containing solid matter. It is available in a huge range of discharge bores from 50 to 800 mm.

Discharge bore 50 - 800mm

• Side discharge

• Channel impeller

• Three phase

• 4 pole motors, 0.4 - 110kW

View Tsurumi B Series Submersible Pump Specs

 

 

Tsurumi C Series Submersible Pump

Tsurumi Channel impeller with cutter
The Tsurumi C-series incorporates a channel impeller with cutter mechanism. A sintered tungsten carbide alloy tip is brazed on the impeller vane and rotates on the serrated part of the suction cover. This mechanism cuts fibrous matter that flows into the pump and discharges them.

Discharge bore 50 - 100mm

• Side discharge

• Channel impeller with cutter
  mechanism

• Three phase

• 2 & 4 pole motors, 0.75 - 15kW

View Tsurumi C Series Submersible Pump Specs

 

 

Tsurumi MG Series Submersible Grinder Pump. 

Incorporated grinding mechanism

The Tsurumi MG-series has a grinding mechanism in its suction port, and it cuts incoming solids into small pieces. This enables the pump to transfer sewage via a small diameter pipe without the fear of clogging.

Discharge bore 32 - 50mm

• Side discharge

• Vortex impeller

• Three phase

• 4 pole motors, 1 - 3.7kW

View Tsurumi MG Series Submersible Grinder Pump Specs

 

 

Tsurumi PSF Series Submersible Pump

Lightweight, high head, corrosion resistant pump

The tsurumi PSF-series is one of the Tsurumi VANCS-series. Being made of stainless steel and special resin, the pump is not only lightweight but corrosion-resistant as well. The built-in closed impeller generates the highest head in VANCS series.

Discharge bore 40 - 50mm

• Side discharge

• Closed impeller

• Single & three phase

• 2 pole motors, 0.25 - 1.5kW

View Tsurumi PSF Series Submersible Pump Specs
 

 

 

Tsurumi SF Series Submersible Pump

Compact effluent pump

The Tsurumi SF-series is a cast iron, compact, effluent pump with a semi-open impeller. It is designed for high-head pumping and de-foaming at wastewater treatment plants.

Discharge bore 50 - 80mm

• Side discharge

• Semi open type impeller

• Three phase

• 2 pole motors, 0.75 - 11kW

View Tsurumi SF Series Submersible Pump Specs

 

 

Tsurumi OM Series Submersible Pump

Lightweight, corrosion resistant pump

The Tsurumi OM2 and OMA2 are made of stainless steel and
special resin. The pump is not only lightweight but corrosion-resistant as well. The semi-vortex pump design minimizes “impeller lock” that occurs when mixed in debris is about to impede impeller rotation. The automatic model uses a cylindrical float, allowing it to be installed in tight spaces.

Discharge bore 32mm

• Side discharge

• Vortex impeller

• Single phase

• 2 pole motor, 0.15kW

View Tsurumi OM Series Submersible Pump Specs

 

 

Tsurumi BQ Series … submersible pump with stainless steel wetted parts

The Tsurumi BQ-series is based on the B-series pumps, but with stainless steel wetted parts. Wide opening channel impeller and shaver mechanism in the suction cover ensures smooth dewatering even when liquid contains suspended solids.

• Discharge bore 50 - 100mm

• Side discharge

• Channel impeller

• Three phase

• 2 & 4 pole motors, 0.4 - 3.7kW

View Tsurumi BQ Series submersible Pump Specs

 

 

Tsurumi CQ Series submersible pumps with Stainless Steel wetted parts & cutter mechanism

The Tsurumi CQ-series is based on the Tsurumi C-series pumps, but with stainless steel wetted parts. Wide opening channel impeller with cutter mechanism ensures efficient draining even when the liquid contains suspended solid and fibrous matter.

Discharge bore 50 - 100mm

• Side discharge

• Channel impeller with cutter
  mechanism

• Three phase

• 2 & 4 pole motors, 0.75 -
  3.7kW

View Tsurumi CQ Series submersible Pump Specs

 

 

Tsurumi SFQ Series …  cast stainless steel submersible pumps

The Tsurumi SFQ-series is made of austenitic cast stainless steel, ideal for draining corrosive liquid in chemical plants or other industrial plants. The pump is a highly specialist pump in term of design and materials.

Discharge bore 50 - 80mm

• Side discharge

• Semi open type impeller

• Three phase

• 2 pole motors, 0.4 - 11kW

View Tsurumi SFQ Submersible Pump Series

 

 

Tsurumi BX Series Submersible Pump

Explosion proof version of B series
The Tsurumi BX-series is the explosion–proof version of the B-series pumps. Suitable for operation in areas where an explosive atmosphere occasionally occurs. The pump series conforms to the relevant EU directives and is certified by ATEX II 2 G Ex d IIB T4 standard.

Discharge bore 80 - 100mm

• Side discharge

• Channel impeller

• Three phase

• 2 & 4 pole motors, 1.6 - 3.8kW

View Tsurumi BX Series submersible Pump Specs

 

 

Tsurumi CX Series explosion Proof submersible Pump

Explosion proof version of C series
The Tsurumi CX-series is the explosion–proof type of the C-series. Suitable for operation in areas where an explosive atmosphere occasionally occurs. The pump series conforms to the relevant EU directives and is certified by ATEX II 2 G Ex d IIB T4 standard.

Discharge bore 80 - 100mm

• Side discharge

• Channel impeller with cutter
  mechanism

• Three phase

• 2 & 4 pole motors, 1.6 - 3.8kW

View Tsurumi CX Series Submersible Pump Specs

 

 

Tsurumi UX Series Explosion Proof Submersible Pump

Explosion proof version of U series
The Tsurumi UX-series is the explosion–proof type of the U-series. Suitable for operation in areas where an explosive atmosphere occasionally occurs. The pump series conforms to the relevant EU directives and is certified by ATEX II 2 G Ex d IIB T4 standard.

Discharge bore 50 - 80mm

• Side discharge

• Vortex impeller

• Three phase

• 2 pole motors, 1.6 - 4kW

View Tsurumi UX Series Submersible Pump Specs 

 

 

Tsurumi TM Series Submersible Sea Water Pump

Lightweight, seawater pump
The Tsurumi TM-series is one of the Tsurumi VANCS-series. All wetted parts are titanium and special resin, therefore the pump is not only lightweight but also resists corrosion by seawater.

Suits marine and aquaculture applications.

Discharge bore 40 - 50mm

• Side discharge

• Vortex impeller

• Single & three phase

• 2 pole motors, 0.25 - 0.75kW

View Tsurumi TM Series Submersible Sea Water  Specs
 

 

 

Tsurumi B Series Submersible Sewage Pump

Tsurumi Channel impeller sewage pump
The Tsurumi B-series is the base model for the Tsurumi range of submersible sewage pumps, and can be used for a wide range of applications.

A channel impeller prevents internal clogging and enables the pump to efficiently transfer sewage and wastewater containing solid matter. It is available in a huge range of discharge bores from 50 to 800 mm.

Discharge bore 50 - 800mm

• Side discharge

• Channel impeller

• Three phase

• 4 pole motors, 0.4 - 110kW

View Tsurumi B Series Submersible Pump Specs

 

 

Tsurumi SSP Submersible Axial Propeller Pump

The Tsurumi SSP-series submersible propeller pump simplifies the

pumping station design and enables installation in a small

space, which reduce engineering and construction costs

substantially.

 

Simple Installation

The pump unit is easily installed in a column pipe, where the

force of gravity keeps it seated firmly on the ledge at the

base of the column. This design feature eliminates the need

for anti-rotation stoppers to prevent rotation of the pump unit.

 

 

 

Tsurumi UZ Series 4 pole Vortex Impeller Submersible Pump

Tsurumi 4 pole heavy duty pump

The tsurumi UZ-series is a vortex pump driven by a 4-pole motor. It has a large solids passage that is equivalent to its discharge diameter giving it excellent solid handling capability. It offers practically choke-free operation in sewage pumping.

Discharge bore 50 - 100mm

• Side discharge

• Vortex impeller

• Three phase

• 4 pole motor, 1.5 - 11kW

View Tsurumi UZ Series Submersible Pump Specs

 

 

 

Tsurumi U Series Vortex Impeller Submersible Pump

Tsurumi Vortex Impeller Choke free operation

The Tsurumi U-series is a vortex pump powered by a 2-pole motor. The impeller produces vortex flow that allows fibrous materials and solid matter to be pumped out with minimum contact with the impeller. It offers practically choke-free operation in sewage pumping.

Discharge bore 40 - 80mm

• Side discharge

• Vortex impeller

• Three phase

• 2 pole motors, 0.25 - 3.7kW

View Tsurumi U Series Submersible Pump Specs

 

 

 

Tsurumi C Series Submersible Pump

Tsurumi Channel impeller with cutter
The Tsurumi C-series incorporates a channel impeller with cutter mechanism. A sintered tungsten carbide alloy tip is brazed on the impeller vane and rotates on the serrated part of the suction cover. This mechanism cuts fibrous matter that flows into the pump and discharges them.

Discharge bore 50 - 100mm

• Side discharge

• Channel impeller with cutter
  mechanism

• Three phase

• 2 & 4 pole motors, 0.75 - 15kW

View Tsurumi C Series Submersible Pump Specs

 

 

 

Tsurumi PU Series Submersible Pumps

Lightweight, corrosion resistant pump

The Tsurumi PU-series is one of the Tsurumi VANCS-series. Being made of stainless steel and special resin, the pump is not only lightweight but corrosion-resistant as well. Built-in vortex impeller and large passage facilitate pump operations to readily dispose of liquid containing various kinds of foreign matter. Automatic type is available in the whole range.

Discharge bore 40 - 80mm

• Side discharge

• Vortex impeller

• Single & three phase

• 2 pole motors, 0.15 - 1.5kW

View Tsurumi PU Series submersible Pump Specs
 

 

Tsurumi Family 12 and Family 12A Single Phase Submersible Pump.

Single phase with outstanding performance. Available in manual (12) and automatic (12A) versions

The Tsurumi Family 12 and 12A are light weight single phase pumps constructed for resin.

Highly regarded as the most reliable household pump in its class.  The Family 12 features a double mechanical seal located in an oil chamber so the seal faces are lubricated and cooled in oil.

Applications include

Garden watering

Cleaning and draining swimming pools

Draining flooded basements

View Tsurumi Family Series Pump Specs

Tsurumi OMA2 Submersible Waste Water Pump

Compact and rugged automatic stainless steel single phase submersible pump.

The Tsurumi OMA2 is a single phase staimless steel (304) corrosion resistant automatic sump pump.

Designed with a semi vortex impeller to minimise impeller lock when debris is in the water to be pumped and a oil lubricated mechanical seal the OMA2 is rugged and reliable yet still compact allowing it to be installed in tight spaces.

View The Tsurumi OMA2 Pump Specs

Tsurumi C Series High Head Submersible Cutter Pump

 

Tsurumi C Series 2 Pole Submersible Pump

Tsurumi Channel impeller with cutter
The Tsurumi C-series incorporates a double channel impeller with cutter mechanism. A sintered tungsten carbide alloy tip is brazed on the impeller vane and rotates on the serrated part of the suction cover. This mechanism cuts fibrous matter that flows into the pump and discharges them.

Discharge bore 80mm

• Side discharge

• Channel impeller with cutter
  mechanism

• Three phase

• 2 pole motors, 2.2-11kW

Download Tsurumi High Head Submersible Cutter Pump Data

Please provide details of your enquiry below.